Home    Products    Gas Springs    Liftstrut Series    LS14BA-500-1118-F1 Gas Spring
Liftstrut Series LS14BA-500-1118-F1 Gas Spring

LS14BA-500-1118-F1 Gas Spring LS14BA-500-1118-F1 Gazlı Amortisör
LS14BA-500-1118-F1 Gas Spring
Diameter
27(1.06″) – 14(0.55″)
Stroke
500 (19,68)
Extended Length
1118 (44,01)
Check for End Fittings
Details
Check for Accessories
Details
Check for Brackets
Details
Additional Information
Diameter 27mm (1,06'') - 14mm (0.55'')
Stroke 500
Extended Length 1118
End Fittings Ball Socket - Ball Socket
Pressure Range 150N - 2500N (33lbs-562lbs )
Rod Material Steel
Tube Surface Black Nitride
Tube Material Steel
Rod Surface Black Epoxy Paint
Rod Mounting Ø13mm (0,51") Ball Socket
Tube Mounting Ø13mm (0,51″) Bal Socket
Instruction For Use
  • Do mount standard gas springs rod down, use within a temperature range of –25°C up to +60°C.
  • Do not allow external objects to exert side load forces on the gas spring or on the end fittings.
  • Do ensure that the end fittings are in line so that side load forces are not applied as a result of misalignment.
  • Do try to use ball joints to help avoid side load forces. If eye (clevises) are used ensure a sloppy fit to allow lateral movement.
  • Do try to use shorter springs close to the hinge rather than long stroke springs away from the hinge.
  • Do provide physical stops to limit the spring’s extremes. i.e. ensure that undue force is not applied to over compress or over extend the spring.
  • Ensure the gas spring’s end fittings are compatible to gas spring and fully screwed home.
  • Do not cycle more than 15 times per minute. Do not scratch, dent, chip, bend or paint the rod.
  • If springs are to be stored prior to use, the spring should be stored rod down to lubricate the seal by its own.