Home    Products    Gas Springs    Liftstrut Series    LS04AA-20-100-F1 Gas Spring
Liftstrut Series LS04AA-20-100-F1 Gas Spring

LS04AA-20-100-F1 Gas Spring LS04AA-20-100-F1 Gazlı Amortisör
LS04AA-20-100-F1 Gas Spring
Diameter
12(0.47″) – 4(0.16″)
Stroke
20 (.79in)
Extended Length
100 (3.94in)
Check for End Fittings
Details
Check for Accessories
Details
Check for Brackets
Details
Additional Information
Diameter 12mm (0.47") - 4mm (0.16")
Stroke 20
Extended Length 100
End Fittings Thread - Thread
Pressure Range 20N-180N(4,5lbs - 40lbs)
Rod Material Steel
Tube Surface Black Nitride
Tube Material Steel
Rod Surface Black Epoxy Paint
Rod Mounting M4 Thread
Tube Mounting M4 Thread
Instruction For Use
  • Do mount standard gas springs rod down, use within a temperature range of –25°C up to +60°C.
  • Do not allow external objects to exert side load forces on the gas spring or on the end fittings.
  • Do ensure that the end fittings are in line so that side load forces are not applied as a result of misalignment.
  • Do try to use ball joints to help avoid side load forces. If eye (clevises) are used ensure a sloppy fit to allow lateral movement.
  • Do try to use shorter springs close to the hinge rather than long stroke springs away from the hinge.
  • Do provide physical stops to limit the spring’s extremes. i.e. ensure that undue force is not applied to over compress or over extend the spring.
  • Ensure the gas spring’s end fittings are compatible to gas spring and fully screwed home.
  • Do not cycle more than 15 times per minute. Do not scratch, dent, chip, bend or paint the rod.
  • If springs are to be stored prior to use, the spring should be stored rod down to lubricate the seal by its own.